Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 27, 2008 at 7:51 pm #11735
    PReither
    Participant

    From Peter Reither

    When i want to Print T4 for my Employees I always get the error massage

    3Errors found in template name range and it will not let me go any furthers.

    any Help would be appriciated.

    Peter Reither

    January 28, 2008 at 4:03 am #13839
    BHalpin
    Participant

    When you get the error, press the help button, and report back what the help screen say’s.

    Bob

    January 28, 2008 at 11:39 pm #13840
    PReither
    Participant

    3 range errors were detected in the template C:/nv2/nv20.dat/object/nv2_table_template.xls
    the errors are.
    1.Header range DOCUMENT is greater than one cell wide
    2.Heater range CONTENT is greater than one cell wide
    3.Heater range COLUMNTITELS is greater than one cell wide.

    January 29, 2008 at 12:55 am #13841
    BHalpin
    Participant

    I think you have the T4 template name wrong. (C:/nv2 … nv2_table_template.xls is not a T4 template.)

    On the Print T4s settings window, on Template, click F3 and choose C:/NV2 … object/newviews/t4-laser-2007.xls.

    Bob

    January 29, 2008 at 3:47 pm #13850
    PReither
    Participant

    When I choose the template as you suggested by typing it in I get the following message

    ERROR occured in C:/NV2/Nv2.exe
    template File C:/NV2…object/newviews/t4-laser-2007.xls does not exist

    January 29, 2008 at 4:40 pm #13851
    MSchappler
    Moderator

    Try c:/nv2/nv20.dat/object/newviews/t4-laser-2007.xls

    You can also press the F3 key next to template and navigate the folders NV2 > nv20.dat > object > newviews > t4-laser-2007.xls

    Regards,

    Martin

    January 29, 2008 at 5:48 pm #13853
    PReither
    Participant

    Mr. Martin,

    This worked I always got the wrong template.
    Thank you verry much,so if you come this way (to my store) some days I owe you Dinner
    you are terrific.
    Thanks
    Peter Reither

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.