Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 28, 2011 at 3:43 pm #11946

    DBoufford
    Participant

    I’ve been using NV1 for years.
    Running Windows XP3.
    Started a new set of books based on an existing set. In the existing set, CHGACCT works perfectly.
    In the new set, when you RUNPROCS – CHGACCT – nothing happens. The screen just goes back to the report view you had prior to running

    I’ve used CHGACCT in numerous set of books & have never had a problem.

    ANY hints would be appreciated.
    TIA

    November 30, 2011 at 12:11 am #14365

    HMah
    Participant

    Easiest would be to re-install NV1PD1. In fact you may wish to re-install all your Prod disks.

    The other option is to copy all your procedures with PUTPROCS and copy into your new books with GETPROCS. That will also insure your templates are the same (may have to change Company and modify if you have a different GST# on your template.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.